Vistalink Pro Interface - evertz 7882J2KX-IPASI User Manual

5. VISTALINK
®
This chapter assumes that VistaLINK
and you have basic knowledge of the VistaLINK
network administrator has already added the appropriate jar file to the server, and both the client and
server applications have been restarted
There are two methods that can be used to communicate with the 7882J2KX-IPASI and VistaLINK
PRO.
1. 7800FC Frame Controller and 7882J2KX-IPASI with appropriate Jar file
Open VistaLINK
on the "+" button. The 7800FC should show up and the number of 7882J2KX-IPASI cards
installed after it in the tree formation
2. Using the 7882J2KX-IPASI control port and appropriate Jar file
Open VistaLINK PRO and click on the refresh tree icon. Select 7882J2KX-IPASI and right click to
®
"View Configuration..."

Please consult your network administrator if you continue to have problems
connecting the card with VistaLINK
Ltd. or your authorized reseller for technical support.
PRO INTERFACE
PRO server and client are already configured for your network
®
PRO and click on the refresh tree icon. Expand the hardware tree by clicking
®
Single Channel J2K Encoder/Decoder
PRO interface. It also assumes that the user or
®
PRO, alternatively contact Evertz Microsystems
®
Revision 1.0
7882J2KX-IPASI
®
Page - 31