7882J2KX-IPASI
Single Channel J2K Encoder/Decoder
5.6.
INPUT AUDIO PROC CONTROL
Figure 5-8 : VistaLINK
- Input Audio Proc Control Tab
®
Input Audio Proc Control
Enable Audio Proc: If this is disabled, Audio will follow the embedded audio. If this parameter is
enabled, it allows the user to select which incoming embedded audio channel goes to which Encoder
source channel. Effectively enabling or disabling an audio router at the source of the encoder.
Encoder Audio Source Select: The drop down menu allows the user to select any embedded audio
channel 1-16 or Mute. When Audio Proc is enabled the respected input channel will be routed to the
Encoder audio source channel as defined by the user.
Page - 43
Revision 1.0