7882J2KX-IPASI
Single Channel J2K Encoder/Decoder
•
Click the 'Upgrade' button on bottom right corner
•
Click the 'Browse' button to select the 7882J2KX-IPASI image file.
•
Click the 'Upgrade' button and wait for the upload to complete. This will take approximately 5 to
10 minutes depending on network traffic. The progress bar to the right will provide feedback on
the status of the upgrade.
•
Upon completion, the 7882J2KX-IPASI module will reboot automatically and return online in
normal "run" mode.
Page - 58
Figure 6-7 : VistaLINK
Figure 6-8 : Selecting File for Firmware Upgrade
Revision 1.0
- Selecting Card for Upgrade
®