Product Features Tab; Product Features Tab; Figure 4-4 : Webeasy - evertz 7882J2KX-IPASI User Manual

7882J2KX-IPASI
Single Channel J2K Encoder/Decoder
Output Port Mux Select
BNC 1-4 Output: This parameter allows the user to select the BNC output type. Choices available are
V-Proc HD/SD-SDI Loopout (forwards the currently selected input), J2K ASI or Decoder.
SNMP Trap Destinations
There are 10 trap destinations that can be configured and enabled.
Destination Enable: This control is used to enable or disable sending out traps.
Destination IP Address: This control is used to specify the trap IP address.
System Control
Reboot: This control can be used to soft reboot the device. It will cycle the power relay and cause an
effective power cycle.
4.2.

PRODUCT FEATURES TAB

The 7882J2KX-IPASI has the ability to enable features by adding/updating applicable licenses. Please
contact Evertz Microsystems Ltd for any additional License generation along with Product Serial
Number and Product MAC address.

Figure 4-4 : WebEASY

- Product Features Tab

®
Product License
Product License File: This parameter allows the user to apply new License key provided by Evertz
Microsystems Ltd. Reserved for future use. The 7882J2KX-IPASI supports 1 encoder and 1 decoder
by default.
Product Serial Number: This parameter displays the card serial number. This is required by Evertz
when generating or updating license files on the 7882J2KX-IPASI.
Product MAC Address: This parameter displays the card MAC address. This is required by Evertz
when generating or updating license files on the 7882J2KX-IPASI.
Page - 15
Revision 1.0