Decoder Control Tab - Part 2 - evertz 7882J2KX-IPASI User Manual

7882J2KX-IPASI
Single Channel J2K Encoder/Decoder
Figure 4-6 : WebEASY

– Decoder Control Tab - Part 2

®
Input Profile
For Main and Backup:
Input Source Select: This control is used to select the physical input source for the Decoder. Options
are Data 1, Data 2, ASI 1 or ASI 2.
IP Address: This control is used to specify the multicast address to be received.
UDP Port Number: This control is used to specify the associated UDP port number for the multicast.
Initial IGMP Version: This control is used to specify the initial IGMP version to use. Options are V2 or
V3.
IGMPV3 Mode: This control is used to specify the type of V3 mode to use.
Page - 18
Revision 1.0