7882J2KX-IPASI
Single Channel J2K Encoder/Decoder
4.10. SYSTEM NOTIFY TAB
Figure 4-14 : WebEASY
– System Notify Tab
®
Temperature Control
Temperature Monitor 1: This field displays the module's temperature.
System Notification
Fan Status: This control sends out a trap if there is a fault generated by the Fan when enabled.
System Faults monitor displays if there is a fault condition on the Fan. Green indicates healthy while
red indicates a fault.
Temperature Status: Reserved for Engineering Use.
SFP Faults
SFP 1 External Link: This control sends out a trap if there is a fault generated by a link loss on SFP 1
when enabled.
SFP External Link Fault Present monitor displays if there is a fault condition on the SFP 1. Green
indicates healthy while red indicates a fault.
SFP 2 External Link: This control sends out a trap if there is a fault generated by a link loss on SFP 2
when enabled.
SFP External Link Fault Present monitor displays if there is a fault condition on the SFP 2. Green
indicates healthy while red indicates a fault.
Memory Self Test Faults
Memory Self Test: This control sends out a trap if there is a fault generated by the memory self test
when enabled.Memory Self Test Fault Present monitors if there is a fault condition on the memory self
test. Green indicates healthy while red indicates a fault.
Page - 27
Revision 1.0