Firmware Upgrade Using Vistalink; Figure 6-6 : Vistalink - Selecting Version Information - evertz 7882J2KX-IPASI User Manual

6.4.

FIRMWARE UPGRADE USING VISTALINK

Upgrading the firmware using VistaLINK
7882J2KX-IPASI or using the 7800FC frame controller. Both methods use the same procedure.
Ensure that the 7882J2KX-IPASI is running the latest firmware, to check this simply right click on the
cards address in VLPro Client and select Version Information as shown in Figure 6-6.
Figure 6-6 : VistaLINK
Once Version Information is selected, Figure 6-7 will appear and the module will be able to be selected
for upgrade.
•
Open hardware tree and select card to be upgraded.
•
Check mark card to be upgraded.
Single Channel J2K Encoder/Decoder
®
can be accomplished using the control port of the
®
- Selecting Version Information
®
Revision 1.0
7882J2KX-IPASI
Page - 57