Encoders Control Tab; Figure 5-9 : Vistalink; Encoders Control Tab Part 1 - evertz 7882J2KX-IPASI User Manual

7882J2KX-IPASI
Single Channel J2K Encoder/Decoder
5.7.

ENCODERS CONTROL TAB

Figure 5-9 : VistaLINK

- Encoders Control Tab Part 1

®
Output Configuration
IP Address: This parameter allows the user to select a streaming output IP address for the Encoder. It
can be a Multicast or Unicast address.
UDP Port Number: This parameter allows the user to select the destination UDP port number of the
streaming output.
TTL: This parameter allows the user to set the TTL (Time To Live) field of the output IP packets.
Total TS Bit Rate: This parameter allows the user to select the output TS Bitrate in kbps. The device
will automatically adjust the bitrate for video based on audio and advanced PID configuration to
maintain the set TS bitrate.
TS Encapsulation Type: This parameter allows the user to select the output encapsulation type. The
options are UDP or RTP.
Audio Delay: This control allows for the user to add audio delay. Range is 0 to 200 ms.
Page - 44
Revision 1.0