4.12. Decoder Notify Tab; Figure 4-16 : Webeasy - evertz 7882J2KX-IPASI User Manual

7882J2KX-IPASI
Single Channel J2K Encoder/Decoder
Encoder Input Status: This control sends out a trap if there is a fault generated by the Encoder Input
Status when enabled. This reports the input video status. If no input is provided, this fault will be
active.
Video Faults displays if there is a fault condition on the Encoder Input Status. Green indicates healthy
while red indicates a fault.

4.12. DECODER NOTIFY TAB

Figure 4-16 : WebEASY

- Decoder Notify Tab
®
Decoder Notification
TS Input Missing: This control sends out a trap if there is a fault generated by a missing TS input
when enabled.
Decoder Input Faults displays if there is a fault condition on the TS Input Missing. Green indicates
healthy while red indicates a fault.
TS Sync Byte Missing: This control sends out a trap if there is a fault generated by a missing TS
Sync Byte when enabled.
Decoder Input Faults displays if there is a fault condition on the TS Sync Byte Missing. Green indicates
healthy while red indicates a fault.
Video PID Missing: This control sends out a trap if there is a fault generated by a missing Video PID
when enabled.
Decoder Input Faults displays if there is a fault condition on the Video PID Missing. Green indicates
healthy while red indicates a fault.
Audio 1 to 4 PID Missing: This control sends out a trap if there is a fault generated by a missing Audio
PID when enabled.
Decoder Input Faults displays if there is a fault condition on the Encoder Input Status. Green indicates
healthy while red indicates a fault.
Page - 29
Revision 1.0