Table of Contents
Advertisement
7814UDX-4K Series
HD/3G/UHD Up/Down/Cross Converters
5.9.
AUDIO INPUT CORRECTION [+APROC]
The Audio Input Correction Controls as shown in Figure 5-13 are used to configure parameters associated
with the embedded audio inputs. Audio Input Correction is used to adjust the Gain, Inversion of the
individual audio input channels and the delay of audio inputs.
Figure 5-13 : WebEASY
- Audio Input Correction Panel
®
Audio Input Correction Controls
Audio Input Inversion: This control is used to invert the incoming audio channel.
Audio Input Gain: This control allows the user to set the value of the gain for the selected source. The
user can adjust the gain of the selected source by moving the associated slider control left to decrease the
value or moving to the right to increase the value. The value range for the gain adjustments is -24 dB to
+24 dB. Gain is adjusted in 0.1 dB increments.
Audio Input Delay: This control allows the user to set the Audio Input Delay. The range is -82.562 ms to
+1195.250 ms.
NOTE: The AES tabs are only available with the [-AES8] product option.
Revision 1.2
Page - 36
Advertisement
Table of Contents
