Product Features; Figure 4-2: Vistalink Pro - Product Features - evertz 3080UEP Series User Manual

System Control
Default Set: This parameter can be used to reset most 3080UEP parameters to factory default
values. All parameters except the below will be reset to Factory defaults:
•
Control Port IP address, Netmask and Gateway will be preserved.
•
Syslog Configuration will be preserved.
•
Presets will be preserved.
•
SNMP Trap destinations, Faults and Video Notify status will be preserved.
Reboot: This control can be used to soft reboot the UEP. It will cycle the power relay and cause an
effective power cycle.
4.2.

PRODUCT FEATURES

The 3080UEP has the ability to enable features by adding/updating applicable licenses. Please contact
Evertz Microsystems Ltd for any additional License generation along with Product Serial Number and
Product MAC address.
System
Product License: This parameter allows the user to apply new License key provided by Evertz
Microsystems Ltd. A license key will be a long string generated by Evertz, specific to the card being
upgraded. When this string is obtained the current Product License can be erased and the new key
can be copy/pasted into the section. When applied the new license will take and the new functionality
will change to enabled under the Prod Feature section.
Professional 3G/HD/SD Universal Contribution Encoding Platform
Figure 4-2: VistaLINK
Revision 0.2
PRO – Product Features
®
3080UEP Series
Page - 13