Tele Radio T24-01 Installation Instructions Manual page 89

Installation instructions│ T24│ Annex A: List of errors and error messages
Event code
Tr430IoAdConversionFailed (1222)
Tr430IoFailedToCompleteInitPhase (1223)
Tr430BrokenSensor (1224)
Tr430IoPinsFailedDuringInit (1225)
StartupCheckOfFuncBlockFailed (1230)
IncorrectSwVersionAllowed (1250)
SkipVersionCheckIsEnabled (1251)
RfidScanUserIdFound (1260)
RfidScanUserIdTimedOut (1261)
RfidScanUserIdError (1262)
RfidScanBatteryFound (1263)
IM-PM-TX101-EN-v08
Event description
[ The IO AD conversion on
TR430 failed ]
[ The IO init phase on TR430
main board failed to finish
on time ]
[ Sensor(s) on pin(s)
0x%08x%08x, main board, is
faulty. Alarm code: xxxx,
arg: xxxxxx ]
[ Failed init check of main
board IO pins, not in zp:
xxxxxx, faulty sensor:
xxxxxx, will be blocked:
xxxxxx (Panther will not
block IO-pins). Alarm code:
xxxx, arg: xxxxx ]
[ Inconsistency found in
settings for function blocks
]
[ CPU with trabusAddr=xxxx
has an invalid SW version,
but skipVersionCheck is
active, so we'll allow this
and continue ]
[ Version dependency checking
of other CPUs is disabled via
skipVersionCheck setting ]
[ RFID: Found UserID UID:
xxxxxx Usage: xxxxxx]
[ RFID: Scanning for UserID
tag timed out ]
[ RFID: An error occured
during UserID scan: xxxx]
[ RFID: Found a battery tag
in slotIdx: xxxx Usage: xxxx
]
Category
1
1
2hw
2hw
2sm
3
3
1
1
1
1
89