Installation instructions│ T24│ Chapter 9: Configuration menu
9.1 4 E ras e RF ID t ags
1. Make sure that the Stop button is pressed.
2. Twist and release the Stop button.
The initial start-up logo is displayed. Battery indicator(s) light(s). The
display shows:
3. Enter Menu mode (see
4. Navigate to the
Up/Down buttons.
5. Press the Select button to enter.
The display shows:
registered RFID tags' ID numbers.
6. Choose the RFID tag to be erased using the Up/Down buttons.
7. Press the Select button to select.
A + sign is displayed in front of the selected item.
8. Press the Back button to accept.
The display shows:
*To check that the RFID tag has been properly erased, see
RFID tags", steps 1–6.
IM-PM-TX101-EN-v08
[Session Selection]
"9.2 Enter Menu mode (no PIN code required)
[Startup Protection – RFID Erase]
[Select a single item]
. The display returns to the menu list.
[Confirmed]
menu using the
and the list showing the
"9.13 Register
").
65