Tele Radio T24-01 Installation Instructions Manual page 59

Installation instructions│ T24│ Chapter 9: Configuration menu
9.9 S et t h e b ac k l igh t in t en s it y
Set the LCD screen luminosity level (in %).
1. Make sure that the Stop button is pressed.
2. Twist and release the Stop button.
The initial start-up logo is displayed. Battery indicator(s) light(s). The
display shows:
3. Enter Menu mode (see
4. Navigate to the
5. Press the Select button to enter.
The display shows:
6. Change the backlight intensity value using the Up/Down buttons.
7. Press the Select button to confirm.
The display returns to the menu list.
IM-PM-TX101-EN-v08
[Session Selection]
"9.2 Enter Menu mode (no PIN code required)
[Backlight Intensity]
[Range: 0–100]
[Value: XX]
menu using the Up/Down buttons.
").
59