Tele Radio T24-01 Installation Instructions Manual page 85

Installation instructions│ T24│ Annex A: List of errors and error messages
Event code
StopButtonDataFromCpu2Incorrect (1173)
CheckOfSafeDataInRadioPacketFailed
(1174)
IoBoardFailedToContact (1180)
IoBoardsUnexpectedNrOfIoBoards (1181)
IoBoardsFailedToConfigureIoBoard (1182)
IoBoardInBootloader (1183)
IoBoardNoResponseToCpuQuery (1184)
IoBoardNoResponseToVersionQuery (1185)
IoBoardInvalidResponsToCpuQuery (1186)
IoBoardInvalidResponsToVersionQuery
(1187)
IM-PM-TX101-EN-v08
Event description
[ The aggregated stop button
bit from CPU2 indicate that
CPU2 thinks the stop button
is pulled when ES1 and ES2
indicate pushed or
inconsistent ]
[ The safe data in radio
packet header is not the same
as the copy of the data held
during packet creation.
Indicates memory corruption ]
[ Failed to contact IO-boards
]
[ Unexpected number of IO-
boards detected, expected
xxxx, detected xxxx ]
[ Failed to configure IO-
board with trabus address
xxxx ]
[ IO board with trabus
address xxxx is in
bootloader, no valid firmware
loaded ]
[ IO board with trabus
address xxxx did not respond
to CPU query ]
[ IO board with trabus
address xxxx did not respond
to version query ]
[ IO board with trabus
address xxxx responded with
malformed response to CPU
query ]
[ IO board with trabus
address xxxx responded with
malformed response to version
query ]
Category
1
1
1
2sm
1
2hw
1
1
1
1
85