Installation instructions│ T24│ Chapter 9: Configuration menu
7. Press the Select button to
enter.
The display shows:
14] [Value:XX]
8. Change the slot ID (1–14) using
the Up/Down buttons.
9. Press the Select button to
confirm.
The display shows:
repeater]
turns off.
NOTE: To check that the repeater has been affected the correct slot ID, repeat
steps 1–6.
IM-PM-TX101-EN-v08
[Range 0–
[Stored in
. The transmitter
Go back to step 1 and try again.
67