Tele Radio T24-01 Installation Instructions Manual page 87

Installation instructions│ T24│ Annex A: List of errors and error messages
Event code
IoBoardFailedToGetHwConfigId (1198)
IoBoardInvalidHwConfigId (1199)
IoBoardUnsupportedHwConfigId (1200)
IoBoardHwConfigIdMismatch (1201)
IoBoardSwIdMismatch (1202)
IoBoardFailedGetSafetyErrors (1203)
IoBoardSafetyError (1204)
IoBoardPresentWhenNotExpected (1205)
IM-PM-TX101-EN-v08
Event description
[ IO board with trabus
address xxxx failed to report
any HW configuration
identifier ]
[ IO board with trabus
address xxxx reported invalid
HW configuration identifier ]
[ IO board with trabus
address xxxx reported
unsupported HW configuration
identifier: xxxx ]
[ IO board with CPU trabus
address xxxx has missmatching
hw config identifier,
expected xxxx, actual xxxx ]
[ IO board with CPU trabus
address xxxx has mismatching
SW-id, expected SW0033-xx,
actual SW0033-xxx ]
[ IO board with CPU2 trabus
address xxxx failed to
respond or responded with a
corrupt response when
retrieving safety errors ]
[ IO board with CPU2 trabus
address xxxx reports safety
error.
cpu1SafeZeroPosInfoAtFailure
xxxxx,
cpu2SafeZeroPosInfoAtFailure
xxxxxx ]
[ IO board with trabus
address xxxx, SW-id SW0033-
xxx, is present, but no board
is expected. This is probably
due mismatch between
configured (in settings) and
connected IO boards ]
Category
1
1
1
2sm
1
1
2hw
1
87