Tele Radio T24-01 Installation Instructions Manual page 49

Installation instructions│ T24│ Chapter 9: Configuration menu
9 . 1 . 1 M E N U M O D E P RO T E C T I O N
PIN codes can be activated to prevent unauthorized personnel from entering the
Menu mode. To activate the PIN code functions, contact your representative for
assistance. All PIN code settings require assistance.
The Menu mode can be protected by PIN codes with different access levels (ex:
standard and admin). Once the protection functions have been activated, a PIN
code will always be required for accessing the Menu mode.
NOTE: Default PIN code for the standard access level is 1234.
9.2 E n t er M en u m o de ( n o P IN c o de requ ired)
9 . 2 . 1 S O F T W A RE V E RS I O N S W 0 0 3 3 -1 1 V 1 0 O R H I G H E R
1. Make sure that the Stop button is pressed.
2. Twist and release the Stop button.
The initial start-up logo is displayed. Battery indicator(s) light(s). The
display shows:
3. Press and hold side button SB3.
4. Press the Stop button.
5. Release SB3.
The display shows the menu list.
6. Select a menu by using the navigation and function buttons on the
transmitter display or side buttons SB1–4 (see
9 . 2 . 2 S O F T W A RE V E RS I O N S W 0 0 3 3 -1 1 V 0 9 O R L O W E R
1. Make sure that the Stop button is pressed.
2. Twist and release the Stop button.
The initial start-up logo is displayed. Battery indicator(s) light(s). The
display shows:
3. Press and hold side button SBX2 (middle button on the right side of the
transmitter).
4. Press the Stop button.
5. Release side button SBX2.
The display shows the menu list.
6. Select a menu by using the navigation and function buttons on the
transmitter display or side buttons SB1–4 (see
IM-PM-TX101-EN-v08
[Session Selection]
[Session Selection]
"8.2 General navigation").
"8.2 General navigation").
49