Tele Radio T24-01 Installation Instructions Manual page 79

Installation instructions│ T24│ Annex A: List of errors and error messages
Event code
SwCrash (1002)
StackOverflow (1003)
SuspectedBusyLoop (1004)
MemFault (1005)
SettingsApiNoFreeFlashBlocks (1006)
StartupVoltages (1007)
StatusReport (1008)
EnteringTrabusConfigMode (1009)
ErrorLoginTooManyRx(1010)
IM-PM-TX101-EN-v08
Event description
[ SW error caused exception
handler xxxx to be called.
Last task executing: xxxx,
dbgWord: , SCB->SHCSR:
xxxx, SCB->CFSR: xxxx,
SCB->MMFAR: xxxx, SCB-
>BFAR: xxxx, r0: xxxx, r1:
xxxx, r2: xxxx, r3: xxxx,
r12: xxxx, lr: xxxx, pc:
xxxx, psr: xxxx ]
[ Task xxxx seem to have
overflowed its stack ]
[ Task id xxxx suspected to
be stuck in busy loop, r0:
xxxx, r1: xxxx, r2: xxxx, r3:
xxxx, r12: xxxx, lr: xxxx,
pc: xxxx, psr: xxxx ]
[ A memory fault was
detected while memory address
xxxxxx was under test ]
[ Settings API found no free
flash blocks during previous
reboot ]
[ Startup voltages
(millivolts), charger: xxxx,
battery: xxxx ]
[ Current temperature is xxxx
centi kelvin. Voltages: xxxx
(millivolts), charger: xxxx,
battery: xxxx ]
[ A request from physical
trabus line to enter trabus
config mode was granted ]
[ Login attempt to xxxx RXs,
too many ]
Category
1
1
1
1
1
3
3
2
2rp
79