Installation instructions│ T24│ Chapter 9: Configuration menu
9.1 2 S el ec t a t im e zo n e
Set the time zone (UTC +/- 14 h).
1. Make sure that the Stop button is pressed.
2. Twist and release the Stop button.
The initial start-up logo is displayed. Battery indicator(s) light(s). The
display shows:
3. Enter Menu mode (see
4. Navigate to the
5. Press the Select button to enter.
The display shows:
selected time zone is marked with a + sign.
6. Choose a time zone using the Up/Down buttons.
7. Press the Select button to confirm.
The display returns to the menu list.
62
[Session Selection]
"9.2 Enter Menu mode (no PIN code required)
menu using the Up/Down buttons.
[Time Zone]
and the list of the available time zones. The
[UTC+01:00]
").
IM-PM-TX101-EN-v08