Installation instructions│ T24│ Chapter 9: Configuration menu
9.1 6 S h o w t h e devic e in f o rm at io n
Display the transmitter's series number and CPU versions.
To see the transmitter's information:
1. Make sure that the Stop button is pressed.
2. Twist and release the Stop button.
The initial start-up logo is displayed. Battery indicator(s) light(s). The
display shows:
3. Enter Menu mode (see
4. Navigate to the
buttons.
5. Press the Select button to enter.
The display shows:
* S/N = serie number; HY= Tele Radio AB's internal product code; TX= transmitter
** CPU01–08: Id number of the software currently used in each of the transmitter's
CPU cards.
68
[Session Selection]
"9.2 Enter Menu mode (no PIN code required)
[Show device information]
[S/N: HY-TXXXX]*
[CPU01: XXXX]
...
menu using the Up/Down
**
IM-PM-TX101-EN-v08
").