In Auto Image Capture Mode - VWR avantor CHEMI Instruction Manual

By default when you save the Protocol that you have just created, the software will only allow
you to access it. This behaviour can be modified using the two checkboxes at the bottom left of
the pop-up.

Use the Lock checkbox to prevent adjustments being made to the Protocol.

Use the Make public checkbox to make the Protocol accessible to other Users.

In Auto Image Capture Mode

To create a Protocol in Auto Image Capture mode:
Work through the following process; select the Blot icon , select your sample type, select your
1.
dye, position your sample, and capture an image.
2. Once the image has been captured the Saved Protocols pop-up appears.
(i) Select the Yes button.
The Save Protocol pop-up appears.
(ii) Follow the prompt in the pop-up and either select an existing Protocol from those
displayed (which will be overwritten by you saving your new Protocol), or enter a name
for your new Configuration in the Enter protocol name here... box, eg Blot Chemi.
By default when you save the Protocol that you have just created, the software will only allow
you to access it. This behaviour can be modified using the two checkboxes at the bottom left of
the pop-up.

Use the Lock checkbox to prevent adjustments being made to the Protocol.
56 vwr.com Instruction manual
NEW PROTOCOL - ADDED TO TOP OF LIST
SAVED PROTOCOLS POP-UP
SAVE CONFIGURATION POP-UP
®
VWR