Table of Contents
Advertisement
Automatic Image Capture Mode
Automatic image capture can be carried out from either Home screen.
Automatic Image Capture
Chemi Rapid
For users who would like a quick and easy capture of their chemiluminescent blot.
1.
Select the Blots icon
1.
Select your Blot type from the drop-down list e.g. Chemi Rapid.
2.
Close the darkroom door and Gel Doc software will automatically capture your image according to
the chemi settings selected on the settings page.
Chemi blot (Single Image)
For users who would like to capture a single image of their chemiluminescent blot without ever saturating
their blot.
1.
Select your Blot type from the drop-down list e.g. Chemi blot (Single Image).
2.
From the dye selection screen select the reagent you are using (this is for reference only).
3.
Close the darkroom door and the software will automatically evaluate the optimal exposure times
and show an image preview.
4.
Under the 'Image Preview' use the slider bar to adjust the exposure time. Slide the bar towards
faster speed to decrease the exposure time (note: this will involve the use of binning. Binning
involves combining pixels on the camera sensor together to form a 'super pixel' letting more light
reach the sensor. When using binning resolution of the image can be lost). Slide the bar towards
'high definition' for more publication quality images (this will require longer exposure times as less
binning will be used).
29 vwr.com
Instruction manual
on the Home screen. This displays the Blots drop-down list.
BLOTS DROP-DOWN LIST
®
VWR
Advertisement
Table of Contents
