Image Actions From Load Images Screen - VWR avantor CHEMI Instruction Manual


Series images can be identified by a pattern of overlapping images in the top right hand corner of
the thumbnail image, as shown below:

If more images than can be displayed are available then a scroll bar appears, scrolling allows you
to display the initially non-displayed images.

Selecting an image or images in the central pane adds the selected image or images to the
Selected Images pane. At the same time the image(s) selected in the central pane turn green,
as shown below.

To de-select an image, select the image again in the central pane or select the red Dismiss icon
in the corner of the image in the Selected Images pane.

Image Actions from Load Images Screen

Once you have located your image(s) using the Load Images screen there are two image actions available;
View Images and Edit. The two Image Action icons are displayed at the bottom of the Load Images
screen.

Initially these icons are initially greyed-out (unavailable), only becoming active once an image
has been selected.

Selecting the View Images icon opens the View Images screen with the image(s) selected on
the Load Images screen displayed in the view pane.

Selecting the Edit icon opens the Image Edit screen with the image(s) selected on the Load
Images screen displayed in the Selected Images pane.

For the actions that can be performed using these screens refer to View Images Screen and
Image Edit Screen sections of this Guide.
62 vwr.com Instruction manual
SELECTED IMAGES
®
VWR
SERIES IMAGE THUMBNAIL