VWR avantor CHEMI Instruction Manual page 53

The exposure/lighting/filter choices that you have selected are now displayed as a set of
13.
Current Protocols in the right hand pane.
14. Position the sample and improve the the preview sample image as much as possible using the
Light / Digital Zoom / Grid / Select Autoexpose Area / Lens Controls, as described previously.
15. Select the Capture button
The Exposure Timing icon
This changes to display the progress of the exposures as concentric coloured bars progressing
around the icon
While the exposures are progressing, and this may take several minutes, it is possible to
navigate away from the Manual Capture screen and browse, view and edit previously captured
images.
The Current Protocol display changes as the series of captures is made. As a capture is made
using a protocol, the protocol box is highlighted yellow. When the capture is complete a green
tick appears inside the protocol box and the yellow highlight is removed. The yellow highlight
then appears on the next protocol box in the series, once that capture has commenced.
As the first image is captured, it appears as the main image in the left hand Image pane, as two
vertically stacked thumbnails in the Image pane, and as a thumbnail in the central Image Pool
pane.
As subsequent images in the series are captured, the main image in the Image pane and the
top image in the thumbnail stack change, becoming combined images. Also the newly captured
image is added to the bottom of the thumbnail stack. The thumbnail stack of images represents
the combined image and the separate images that make it up. By default the main image is the
selected image from the thumbnail stack, this is indicated by a yellow highlight around the top
image in the stack.
Once the series of captures is complete, the combined image appears as the main image in the
Image pane along with the stack of series captured images, and also as a thumbnail in the
central Image Pool pane. The thumbnail stack in the Image pane will consist of one more
image than the number of images selected on the Number of images selector since it displays
the individual capture images and the combined image.
MULTIPLEX EXPOSURE - READY TO
START CAPTURES
In the left hand pane the main image displayed is the image in the thumbnail stack that is
selected, this is indicated by a yellow highlight around the thumbnail. By default this is the
combined image.
52 vwr.com Instruction manual
MULTIPLEX PROTOCOLS
.
appears at the bottom of the screen.
.
®
VWR
MULTIPLEX EXPOSURE - ALL TWO
CAPTURES COMPLETE