Automatic Image Capture - Sample Positioning And Capturing An Image - VWR avantor CHEMI Instruction Manual

2. Input the exposure time for the first image e.g. 1 minute then input the exposure time for the last
image e.g. 4 minutes.
3. Select the total number of images to be captured.
4. Check the box if you would like to image a visible marker.
Press the capture button to capture the image.
AUTOMATIC IMAGE CAPTURE - SAMPLE POSITIONING AND CAPTURE SCREEN
SAMPLE POSITIONING
At this point the Camera is live and the image it is seeing of your sample is presented in the left
hand pane. Controls are provided for you to improve this live preview image of your sample,
enabling you to improve the image quality before the Instrument makes an image capture.
LIGHTING OPTIONS TO IMPROVE SAMPLE IMAGING
The Lighting function provides additional options for aligning the sample in the Drawer. Selecting the
icon turns the interior white lights on, giving greater visibility of the sample in the Drawer. Re-select the
icon to turn the white lights off again. The sample image should now appear much clearer.
SAMPLE ALIGNMENT USING THE GRID
The Grid button lets you overlay a grid on the image, enabling you to better align the sample. Use the
Door Open button on the right hand side of the Darkroom to open the Darkroom Door slightly to enable
31 vwr.com Instruction manual
®
VWR