VWR avantor CHEMI Instruction Manual page 45

You must now set the interval time (time between captures in the series), the exposure times
9.
for each image in your series of images, and the lighting/filter sets for your images. The
controls for these are displayed in the right hand pane.
SERIES EXPOSURE CONTROLS - FIRST IMAGE SERIES EXPOSURE CONTROLS - SECOND IMAGE
SAME AS PREVIOUS UNSET
SERIES EXPOSURE CONTROLS - THIRD IMAGE
SAME AS PREVIOUS UNSET
The display is almost the same for each image in the series and by default starts at image 1.
The Capture Interval controls are simple + / - buttons for adjusting the following time periods;
hours (h) , minutes (m) , seconds (s) , and milliseconds (ms) .
Using the Capture Interval + / - buttons enter an interval time for the series of images.
The manual Exposure controls are simple + / - buttons for adjusting the following time periods;
hours (h) , minutes (m) , seconds (s) , and milliseconds (ms) .
To set a manual exposure time select the Manual button and use the Exposure + / - buttons
enter an exposure time for the first image. Alternatively, selecting the Auto button after you
have selected the lighting and filters allows the system to automatically select the most
appropriate exposure time for the image 1.
Use the Lighting and Filters functions in the right hand pane to make your lighting and filter
selections as described previously.
®
44 vwr.com Instruction manual VWR