Utility Mode" Function; Set Time - VWR SAS Super ISO Instruction Manual

"UTILITY MODE" function

In this programme the following SUB-MENUS are listed: Set time, Site, Identify, Language, Display Record, Clear
Record, Remote Control, Calibration and Autoswitch.
Always start from UTILITY MODE to reach one of these SUB-MENUS.
Switch on the unit by touching the screen for at least two seconds.
Press MENU and select UTILITY MODE function by pressing the "UP" or "DOWN" arrows.
Press ENTER to enter the sub menu.

"SET TIME"

This option is used to programme day, month, year and time of the day.
Press ENTER to modify the time.
08/31/06 11.31
TIME
* * D E L A Y * *
START
MENU'
UTILITY MODE
CLEAR
UTILITY MODE
SET TIME
CLEAR
MENU
ENTER
ENTER
15