Table of Contents
Advertisement
(i)
To make one of the individual capture images in the stack the main image, select the
drawing side of the thumbnail. The yellow highlight will move from the default thumbnail
to the selected thumbnail.
(ii)
To view the complete main image in the left hand pane, select the Minimise button
above the thumbnail stack.
(iii)
To view the thumbnail stack once more, select the Minimise button again.
The appearance of the individual captured images can be manipulated if desired to improve the
appearance of the overall combined image, e.g. by changing the colour of the coloured bands
to produce a greater colour contrast.
(iv)
Select the right arrow at the side of the thumbnail image you want to change and select
a new colour from the drop down menu. To reject a colour and return to the original
setting select Default from the drop down menu.
When initially captured, images in the Image Pool are unsaved and are outlined in red.
To save a captured image, select the image in the Image Pool and select the Save icon
16.
Once saved, images in the Image Pool are outlined in green and their filename appears below
the image.
Images can be dismissed from the Image Pool by selecting them and then selecting the
Close button
53 vwr.com
Instruction manual
MINIMISE BUTTON
UNSAVED IMAGE POOL IMAGE
SAVED IMAGE POOL IMAGE
. If an image has not been saved you will see a Save prompt.
®
VWR
Minimise Button
.
Advertisement
Table of Contents
