Opening A Protocol; Deleting A Protocol - VWR avantor CHEMI Instruction Manual

Opening a Protocol

To open and use an existing Protocol from the Home screen:
On the Home screen select the Protocol you want to use.
1.
On the Standard View Home screen you can sort and search saved protocol:
Sort By options are: Last Used, Title, Author, Type/Dye.
Search is by entering text in the Search title here... field. There is also a Clear button to clear
entered search text.
The software will configure your VWR
Configuration file and will take you to the following point in the image capture process:
If the Configuration is in Auto Image Capture mode the system will display the Sample
Positioning screen, as shown below:
If the Protocol is in Manual Image Capture mode the system will display the relevant Manual
Capture screen with the defined protocols displayed, typically as shown below:
Position the sample and complete the appropriate Automatic or Manual Image Capture process
2.
as described previously.

Deleting a Protocol

To delete a Protocol from the Home screen:
Select the Delete Protocol button
3.
In the Delete Protocol pop-up select the Yes button.
4.
59 vwr.com Instruction manual
AUTOMATIC CAPTURE SAMPLE POSITIONING
TYPICAL MANUAL CAPTURE SAMPLE POSITIONING
DELETE PROTOCOL POP-UP
®
VWR

Chemi Only Instrument based on the data in the
in the Protocol that you want to delete.