Protocols- Saving,Opening And Editing; Introduction; Creating And Saving A Protocol; From The Home Screen - VWR avantor CHEMI Instruction Manual

Protocols- Saving,Opening and Editing

Introduction


The VWR Image Capture software can make the running of repeated workflows easier by storing a
workflow as a Protocol. Protocols can be:

Easily created

Have a wide variety of settings

Easily re-used

Easily modified

Creating and Saving a Protocol

From Home Screen
To create a Protocol for a Blot from the Home screen:
Work through the following process; select the Blot icon , select your sample type, select your
1.
dye, position your sample, and capture an image.
Once the image has been captured the Saved Protocols pop-up appears.
2.
(i) Select the Yes button.
The Save Protocol pop-up appears.
(ii) Follow the prompt in the pop-up and either select an existing Protocol from those
displayed (which will be overwritten by you saving your new Protocol), or enter a name
for your new Protocol in the Enter Protocol name here... box, eg ECL chemi.
By default when you save the Protocol that you have just created, the software will only allow
you to access it. This behaviour can be modified using the two checkboxes at the bottom left of
the pop-up.

Use the Lock checkbox to prevent adjustments being made to the Protocol.

Use the Make public checkbox to make the Protocol accessible to other Users.
The new saved Protocol ECL Blot appears on the Home screens, eg on the Home screen:
55 vwr.com Instruction manual
SAVED PROTOCOLS POP-UP
SAVE CONFIGURATION POP-UP
®
VWR