Operating; Operator Controls; Rear Panel; Connected Pc - VWR avantor CHEMI Instruction Manual

Operating

Operator Controls

Rear Panel

The rear panel of the VWR

An ON/OFF rocker switch, used for energising/de-energising the instrument.

Connected PC

The keyboard and mouse of an external PC connected to a VWR
normal.

Instrument Set-up - Darkroom

Make sure that the Laboratory bench is strong enough to support the VWR
stable and level.
Caution Do not energise any of the components until instructed to.
Make the following cable connections:
15. Connect the mains power cord between a power supply socket and the Instrument. DO NOT
switch on.
Ensure that the mains supply socket on the Instrument is not obstructed, i.e. leave
a gap to allow easy disconnection of the mains cord.
WARNING
Connect Darkroom to the PC using the USB lead.
16.
Connect the camera USB cable to the back of the darkroom to connect the camera to the PC.
17.
Energise the Darkroom - ON/OFF switch on the back of the Darkroom.
18.
19. Startup the PC and install the VWR

20. The VWR Gel Doc software will install automatically.
Double click the (
21.
18 vwr.com Instruction manual

Chemi Only Instrument contains two User controls:

Image Capture software.
) icon to start the VWR
®
VWR

Chemi Only Instrument function as

Chemi Only Instrument and is

Image Capture software.