Manual Image Capture - Additive Series - VWR avantor CHEMI Instruction Manual

(i) If multiple images are captured without any images being saved, multiple images can be
selected and saved in a single operation. Check the Multi Select Mode checkbox in the
Image Pool and select multiple images.
(ii) To save the selected images, select the Save icon
For more information on saving refer to Common Screen Functions and Tools.

Manual Image Capture - Additive Series

Select the Additive Series button from the Image Capture options.
6.
You must now define the number of images you want in your series. In the right hand pane the
Number of images selector is displayed.
Use the + / - buttons to select the number of images you want to capture, then select the Next
7.
arrow . For this example, set to 3 by selecting the + button.
You must now define a Camera resolution for your series of images. In the right hand pane the
Binning selector is displayed.
8. Select the No Binning (4.03MP) button and select the binning ratio you want to use from the
drop-down list, then select the Next arrow
select the Next arrow
You must now set the exposure time, capture intervals, and select lighting and filter options for
9.
image 1. This process is the same as that for Manual Image Capture - Series.
47 vwr.com Instruction manual
SAVE PROMPT
NUMBER OF IMAGES SELECTION
BINNING SELECTOR
.
BINNING RATIO DROP-DOWN LIST
®
VWR
.
, or if you want to use the full resolution just