Table of Contents
Advertisement
10.
Select the Next arrow
apply the settings you have entered for image 1 to all of the remaining images in your series.
Go to Step 14.
11.
By default the Same as previous checkbox is checked, making the settings for the second
image the same as the settings for first image, and the setting boxes are greyed out meaning
that no manual changes can be made. To make changes for the second and subsequent
images, uncheck the Same as previous checkbox.
12.
Enter the settings for all the images in your series.
13.
Select the Next arrow
14.
The exposure/interval/lighting/filter choices that you have selected are now displayed as a set
of Current Protocols in the right hand pane.
15.
Position the sample and improve the the preview sample image as much as possible using the
Light / Digital Zoom / Grid / Select Autoexpose Area / Lens Controls, as described previously.
Select the Capture button
16.
The Exposure Timing icon
This changes to display the progress of the exposures as concentric coloured bars progressing
around the icon
While the exposures are progressing, and this may take several minutes, it is possible to
navigate away from the Manual Capture screen and browse, view and edit previously captured
images.
The Current Protocol display changes as the series of captures is made. As a capture is made
using a protocol, the protocol box is highlighted yellow. When the capture is complete a green
tick appears inside the protocol box and the yellow highlight is removed. The yellow highlight
then appears on the next protocol box in the series, once that capture has commenced.
45 vwr.com
Instruction manual
to make the settings for image 2. Select the Last arrow
.
SERIES PROTOCOLS
.
appears at the bottom of the screen.
.
®
VWR
to
Advertisement
Table of Contents
