VWR avantor CHEMI Instruction Manual page 79

Note: Selected function buttons turn red. They stay red and the function remains active until the
function button is re-selected.
IMAGE SOURCE
This function is as described previously in Image Edit Screen - General Option.
OTHER
The Saturation and Default functions are as described previously in Image Edit Screen -
General Option.
INVERT PEAKS
Select invert peaks to invert the band peaks on the 3D view.
COLOUR
The Colour function can be used to improve the appearance of an image by changing the
colour of the coloured bands to produce a greater colour contrast; this can make seeing fainter
bands more visible.
The image being viewed in the 3D view is a multiplex; the colour change is applied to all of the
individual exposure captures but not the composite image. To apply the colour change to the
composite image as well check the Use in Composite check box.
Use the colour picker to add a custom colour to a single image. Select the 'Colour Image'
button
78 vwr.com Instruction manual
3D VIEW OPTION CONTROLS/FUNCTIONS
and then from the pop up use the slider bars to create a custom colour.
®
VWR