Table of Contents
Advertisement
You are now ready to capture your sample image. You have two options; to let the VWR
8.
Image Capture program set the exposure time automatically, or, you set the exposure time
manually.
Select the Auto Capture button
9.
The VWR
Image Capture program will decide the best exposure time for the settings you have
10.
entered. This time will appear in the Exposure function in the right hand pane. The Auto
Capture function is designed to capture the maximum available number of grey scales without
allowing image saturation. This function is useful for quantifying data.
The following pop-up message is displayed as the Instrument makes an image capture:
11.
The Exposure Timing icon
12.
the progress of the exposure as a coloured bar progressing around the icon.
13.
While the exposure is progressing, and this may take several minutes, it is possible to navigate
away from the Manual Capture screen and browse, view and edit previously captured images.
Once the image is captured, it appears in the left hand pane and also as a thumbnail in the
14.
central Image Pool pane. If more images are captured, these also appear in the Image Pool.
When initially captured, images in the Image Pool are unsaved and are outlined in red.
15.
11b. To save a captured image, select the image in the Image Pool and select the Save icon
.
40 vwr.com
Instruction manual
BINNING RATIO DROP-DOWN LIST
.
AUTO EXPOSING MESSAGE POP-UP
appears at the bottom of the screen. This changes to display
UNSAVED IMAGE POOL IMAGE
®
VWR
Advertisement
Table of Contents
