VWR avantor CHEMI Instruction Manual page 34

You also have the option to use the area outside of the yellow box to set the exposure. This is useful if the
bulk of the image is faint and only a small area contains prominent bands. The yellow box can be
positioned to contain the prominent bands and then the Use Area Outside ROI checkbox can be checked.
Exposure will then be based on the area outside the yellow box.
CURRENT PROTOCOL BOX
The Current Protocol box summarises the lighting and filter combination being used, and displays the
exposure information; an exposure time if a manual exposure has been set, 'Automatic Exposure' if the
exposure is to be set automatically.
IMAGE CAPTURE
To capture an image using the entered selections, select the Capture button
The following pop-up message is displayed as the Instrument makes an image capture:
The Exposure Timing icon
progress of the exposure as a coloured bar progressing around the icon. If capturing multiple exposures,
the icon displays multiple coloured bars.
While the exposure is progressing, and this may take several minutes, it is possible to navigate away from
the Automatic Capture screen and browse, view and edit previously captured images. The Exposure
Timing icon remains displayed at the bottom of the screen. Selecting this icon at any time returns you
to the Automatic Capture screen.
Once the image is captured, it appears in the left hand pane and also as a thumbnail in the central Image
Pool pane. As more images are captured, these also appear in the Image Pool. When initially captured,
images in the Image Pool are unsaved and are outlined in red.
To save the captured image, select the image in the Image Pool and select the Save icon
33 vwr.com Instruction manual
CURRENT PROTOCOL BOX
AUTO EXPOSING MESSAGE POP-UP
appears at the bottom of the screen. This changes to display the
UNSAVED IMAGE POOL IMAGE
®
VWR
.
.