Table of Contents
Advertisement
2.
Select your Blot type from the drop-down list e.g. Visible Blot
3.
Select your sample size from the standards in the pop-up menu, or enter the dimensions of
your sample in the Size boxes, in cm.
4.
From the sample positioning page adjust the lens controls.
5.
Press the capture button to capture the image.
AUTOMATIC IMAGE CAPTURE - SAMPLE POSITIONING AND CAPTURE SCREEN
SAMPLE POSITIONING
At this point the Camera is live and the image it is seeing of your sample is presented in the left hand pane.
Controls are provided for you to improve this live preview image of your sample, enabling you to improve
the image quality before the Instrument makes an image capture.
LIGHTING & FILTER OPTIONS TO IMPROVE SAMPLE IMAGING
The Lighting & Filter function provides additional options for aligning the sample in the Drawer. Selecting
the
icon turns the interior white lights on, giving greater visibility of the sample in the Drawer. Re-select
the
icon to turn the white lights off again. Selecting the
software to remove the emission filter so it is no longer in front of the Camera. The sample image should
now appear much clearer. The software will automatically place the emission filter back in front of the
Camera when the green bouncing arrow is pressed.
LENS CONTROLS
Note:
The lens controls that are available are Focus, Iris (aperture), and Zoom.
The available lens controls appear in the Lens Control pane.
vwr.com
38
Instruction manual VWR
icon informs the Gel Doc image capture
®
Imager2
Advertisement
Table of Contents
