Delete File; Configuration - JMA AVANTCODE User Manual

4.4.3

DELETE FILE

Once you have created the files, you can delete them from the memory.
• Press the "DELETE FILE" icon.
• In the next screen you can see the files previously created and use the up and down arrows to
visualize the various files, until you find the file you wish to delete.
• Once you have located the file, select it and press the ENTER button to delete it from the
memory.
4.5

CONFIGURATION

The machine leaves the JMA factory having been calibrated and is ready for use.
As described earlier, the AVANTCODE machine can have two distinct configurations
(See section 3):
1. AVANTCODE (STANDARD): Clamp and reading clamp.
2. AVANTCODE (KEY FEEDER): Automatic clamp and feeder and reading clamp.
Each time the AVANTCODE configuration is changed from STANDARD to KEY FEEDER or vice-
versa, you need to calibrate the machine prior to performing any operation (cutting, reading or
copying a key). If it has not been calibrated, an information screen will appear.
EDITING FILES
File name:
-----------
Key type: <>
flat
WARNING!!!
You need to
calibrate
the machine
45