JMA AVANTCODE User Manual page 37

(NB: If the machine has a key feeder set up and you choose a double sided key or car key with a
plastic bow an information screen will appear explaining that this key is incompatible with the
application).
•
Once you have selected the key you wish to cut, the steps or screens to follow to cut the
key are the same as those that appear under the CUT=>FILE option. (Section 4.1)
CUT KEY
File :476
Side: A
Serial no.: 1234567890
Bitting code:
-------
4. Key type
• Select the key and press ENTER on the keyboard.
(NB: The list of manufacturers is in alphabetical order)
KEY MODEL
AB-10I
AB-1D
AB-1I
AB-4D
AB-5D
WARNING!!!!!
Incompatible
cutting selection. Feeder and two-
sided key.
CUTTING INFO
Milling tool FP16W
Clamp MP1
Flech
Clamp side
Clamp stop
Arrow to move the cursor
up
Cut key
New bitting
Flech
Number of keys
1
C
Cut - electricity
Cut type NORMAL
Material:
Steel – silver nickel
Arrow to move the cursor
down
CUT KEY
31