JMA AVANTCODE User Manual page 40

•
Open the clear shield and place the key in the reading clamp, bearing in mind the
corresponding position according to the information in the file. Close the shield and press
ENTER on the keyboard.
(NB: There must be no keys present in the feeder at this point. If there are, the machine will
prevent you from reading the key.)
•
Once the key has been read, the following window appears.
When you press the START button the machine will cut the values of the original
1.
key file.
When you press ENTER, the machine will cut the values read by the laser.
2.
•
The same options as those under the "Cut key" screen appear on the last screen.
READ KEY
Place key in position
START / STOP
Feeder empty?
READ KEY
File: 476
9 9 9 9
824 824 824 824 824
815 813 812 813 813
START / STOP
ENTER / ESC
Side: A
9
34