JMA AVANTCODE User Manual page 34

• Once you have selected the model, its characteristics are displayed: profile, serial
number, file and system.
TE-8I
Perfil
.........A 1234567890
.........B 1234567890
Ref. Number on main
screen
• Select the specific key you wish to cut and press ENTER on the keyboard.
(NB: If the machine has a key feeder set up and you choose a double sided key or car key with a
plastic bow and information screen will appear).
• Once you have selected the key you wish to cut, the steps or screens to follow to cut the
key are the same as those that appear under the CUT=>FILE option. (Section 4.1)
Serie Ficha
476
476
XXX/XXX
Total number of references
WARNING!!!!!
cutting selection. Feeder and two-
sided key.
Arrow to move the cursor
up
Sistema
Arrow to move cursor
down
Incompatible
28