JMA AVANTCODE User Manual page 31

•
Then enter the bits and press ENTER.
•
The following screen is for information only, it tells us which mill bit and clamp to use
and how to secure the key in the clamp (See section 3.1.1).
•
Open the clear shield and place the blank key in the clamp, in accordance with the cutting
information.
•
Close the shield and press ENTER.
•
The following options appear on the final screen, select one and press ENTER.
CUT KEY
File:476 Side: A
Serial no.:1234567890
Bit code:
-------------
CUTTING INFO
Milling tool
Clamp
Clamp side
Clamp stop
CUT KEY
Cut key
New bitting
Number of keys
Cut - electricity
Cut type NORMAL
Material:
Steel – nickel silver
FP16W
MP1
1
C
25