Convert The Avantcode (Standard) Into An Avantcode (Key Feeder) - JMA AVANTCODE User Manual

3.3

CONVERT THE AVANTCODE (STANDARD) INTO AN AVANTCODE (KEY FEEDER)

Converting the AVANTCODE (STANDARD) into an AVANTCODE (KEY FEEDER) only involves
mounting the key box for automatic unloading. Step-by-step instructions for how to perform this
conversion are set out below:
Mounting the key box:
•
Release the screws (T10) of the decorative case (Fig.29).
•
Position the key box holder and fasten in place using the screws supplied (T11) (Fig.30).
•
Insert the key box (P5) in the holder (Fig.31)
.
T10
Fig.29
Fig.31
T11
Fig.30
P5
22