Introduction And Overview; Overview; Transport And Packaging; Id Label - JMA AVANTCODE User Manual

1

INTRODUCTION AND OVERVIEW

OVERVIEW

1.1
The AVANTCODE key cutting machine has been designed in compliance
with EU safety regulations.
The safety of users of this type of machine is only achieved thanks to a
well designed safety program, the implementation of a maintenance
program and by following the recommendations for use, and complying
with the safety rules set out in this manual.
Although this machine is not hard to install, it's advisable not to install,
adjust or handle it without having first read this manual.
The machine leaves our factory ready to use and only needs to be
calibrated for the type of operations for which it will be used.

TRANSPORT AND PACKAGING

1.2
The machine comes inside packaging with the following measurements:
Width = 640 mm, length = 770 mm, height = 575 mm
Machine weight including packaging = 60 kg.
Inspect the machine carefully on opening the parcel to ensure that no
damage occurred during transport. If there is an anomaly, please contact
the transport company immediately and do not use the machine until they
have carried out their inspection.

ID LABEL

1.3
The AVANTCODE duplication machine has an ID label (Fig. 1) showing
the serial number or machine registration number as well as the
manufacturer's name and address, EC label and year of manufacture.
Fig.1
1