Cutting With Electricity; Improper Use Of Electricity - JMA AVANTCODE User Manual

•
•
Each number has its own key.
•
The letter keys work as follows:
1. To select the first letter, simply press it once.
2. Select the second letter on the keyboard by pressing the same key twice.
3. Select the third letter on the keyboard by pressing the same key three times. If you press
the same letter more than three times, it will go back to the first letter and so on.
2.8

CUTTING WITH ELECTRICITY

The machine comes equipped with a low current that enables numerous improvements when
cutting keys (Fig.7), such as:
Placing the key in the best clamp face (1, 2, 3, 4) to ensure a better grip.
a)
Avoiding the need for pins and/or adaptors.
b)
When the electricity is switched on, the cutting depth is automatically calculated once the key is
touched. Electricity can be used with steel, brass and zamak keys.
To activate the electricity, go to the final screen of the cutting menu, under the electricity section
and then press the START button (Fig.8)
Electric contact
Fig.7
2.8.1

IMPROPER USE OF ELECTRICITY

Do NOT cut anodized aluminum, plastic or other non-conductive materials.
The alphanumeric keys are used as follows:
CUT KEY
Cut key
New bittings
Number of keys
Cut - electricity
Type of cut - NORMAL
Material:
Steel-Nickel Silver
Fig.8
9