Step 4: Rotate the right side of the HDD upward 45 degrees, and then remove the HDD from
the tray.
4.
Install a new HDD into the tray, and install it back into the server.
6.5 Hot-plug PCIE Card Option
CAUTION:
For proper cooling, do not operate the server without the access panel, baffles,
expansion slot covers, or blanks installed. If the server supports hot-plug components,
minimize the amount of time the access panel is open.
1.
Extend the server from the rack.
2.
Remove the access panel.
3.
Remove the hot-plug PCIE card.
28