Command Types; Web Function; Website Of The Identcontrol Compact - Pepperl+Fuchs IC-KP2-2HB17-2V1D Manual

IC-KP2-2HB17-2V1D
Commands
7.4

Command types

When using commands, a distinction is always made between the two command types single
mode and enhanced mode.
Single mode
The command is executed once. A response is issued immediately.
Enhanced mode
The command remains permanently active until it is interrupted by the user or by an error
message. A response is issued immediately.
The command remains active after the response is issued. Data is only transferred if read/write
tags change. Read/write tags are not read twice. If a read/write tag leaves the read range, the
status '5' is output.
7.5

Web function

7.5.1

Website of the IDENTControl Compact

You can configure and operate the IDENTControl Compact using an integral website, which
also provides information about the device.
The website is displayed in a standard web browser.
To address the IDENTControl Compact over the web, connect the IDENTControl Compact to a
PC using a network cable.
Note!
If you have not changed the IP address of the IDENTControl Compact, the IP address of the PC
must fall within the area 169.254.X.X.
Accessing the website
Enter the IP address of the IDENTControl Compact (preset to 169.254.10.12) in the input field
of a web browser and press return to confirm.
The homepage opens.
24