Pepperl+Fuchs IC-KP2-2HB17-2V1D Manual page 52

IC-KP2-2HB17-2V1D
Commands
The configured topology (offline) is shown in the left-hand window. The configured
topology shows the topology stored in the higher-level controller.
4. Press the "Start" button above the right-hand window to identify the actual topology. The
detected topology (online) is shown in the right-hand window.
5. Confirm the detected topology by accepting the ports. To do this, select the object name of
the device and click the "Apply" button.
Figure 7.8
6. Open a graphical representation of the topology by clicking the Graphic view tab.
52
Offline/Online Vergleich