Displays And Controls - Pepperl+Fuchs IC-KP2-2HB17-2V1D Manual

IC-KP2-2HB17-2V1D
Product Description
4.7

Displays and Controls

LEDs
Description Function
1
2
CH1
CH2
PWR/ERR Status display for
Link/Traffic
ADDR
STATE
Operating controls
Description
Rotary switch
1 2
CH1 CH1 CH2 CH2
PWR/ERR
Link/ Link/
Traffic Traffic
Status description
Status display for LED illuminates green when there is an active command on
the read/write the read/write head.
heads LED illuminates yellow for approx. 1 second when a
command is executed successfully.
Displays the LED illuminates green when a read/write head is connected
read/write heads to channel 1 or channel 2.
connected LED illuminates red if a configuration error occurs.
(channel)
LED illuminates green when the IDENTControl Compact is
the IDENTControl connected to a power supply and the interface is ready for
Compact operation.
LED illuminates red if there is a hardware error or a
PROFINET name has been assigned and no PROFINET
connection has been established.
LED illuminates yellow while the IDENTControl Compact
starts up. The start-up process lasts approximately 20
seconds
LED flashes green if a signal is sent to the IDENTControl
Compact via the "Flashing" PROFINET function or if there is
an internal data overflow.
Connection/networ LED is off until initial communication is made via Ethernet.
k activity for the LED illuminates green when a connection to the network is
relevant channel established.
(1/2) LED flashes yellow at the same speed as the data being
sent.
Status display for LED flashes green when the IDENTControl Compact is
address setting ready for the address to be entered using the rotary switch.
LED illuminates green when one digit of the address is
entered successfully using the rotary switch.
Function
Device address setting
C
Address
configuration
Address
state
Configuration option
0 ... F
15